Introduction - Yunca Gas LEEDZ Operations, Maintenance & Warranty Information

INTRODUCTION

Welcome and congratulations on purchasing your YUNCA LEEDZ FLUED GAS
HEATER.
Please read the following carefully before attempting to operate the heater and ensure
all members of your home understand how this elegant and highly efficient heater
functions.
Please fill out and return the registration card promptly.
These instructions should be stored in a convenient safe place for ready reference. If
you have any questions regarding your heater please contact your YUNCA LEEDZ
dealer.
The YUNCA LEEDZ FLUED GAS HEATER is a listed gas-fired, conventionally vented,
room heater tested by independent laboratories to Australian and New Zealand
standards.
The installation of the YUNCA LEEDZ FLUED GAS HEATER must be carried out by a
suitably qualified person and comply with the current New Zealand or Australian
installation code, NZS 5261:1996/ AG 601:1998
CAUTION
: This appliance must be flued to atmosphere. Installation and repair of
the YUNCA LEEDZ VENTED GAS HEATER should be done by a qualified person. The
appliance should be serviced at least annually by a qualified service person. Control
valve compartments, burners, fan, and air circulating passageways of the Leedz must
be kept free from any lint and dust build-up to ensure efficient and safe operation of the
heater.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS
OPERATIONAL.
To remove internal packaging, refer to page 12 for front door removal.
25-07-01 Page 3 of 22 Operation Instructions for Leedz Free Standing July 2001.doc