Introduction - Yunca Gas jervois Operation, Maintenance And Warranty Manual

INTRODUCTION

Welcome, and congratulations on purchasing your YUNCA JERVOIS FLUED GAS HEATER.
Please read the following carefully before attempting to operate the heater and ensure all members
of your home understand how this elegant and highly efficient heater functions.
Please fill out and return the registration card promptly.
These instructions should be stored in a convenient safe place for ready reference. If you have any
questions regarding your heater please contact your YUNCA JERVOIS dealer.
The YUNCA JERVOIS FLUED GAS HEATER is a listed gas-fired, conventionally vented, room
heater tested by independent laboratories to Australian and New Zealand standards.
The installation of the YUNCA JERVOIS FLUED GAS HEATER must be carried out by a suitably
qualified person and comply with the current New Zealand or Australian installation code, NZS
5261:1996/ AG 601:1998
CAUTION
: This appliance must be flued to atmosphere. Installation and repair of the YUNCA
JERVOIS VENTED GAS HEATER should be done by a qualified person. The appliance should be
serviced at least annually by a qualified service person. Control valve compartments, burners, fan,
and air circulating passageways of the Jervois must be kept free from any lint and dust build-up to
ensure efficient and safe operation of the heater.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS
OPERATIONAL.
To remove internal packaging, refer to page 11 for front door removal.
19-07-05 Page 3 of 20 Operation Instructions for Jervois Freestanding Gas Heater March 2002