Introduction - Yunca Gas LEEDZ INBUILT Operations, Maintenance & Warranty Information

INTRODUCTION

Welcome and congratulations on purchasing your YUNCA LEEDZ INBUILT FLUED GAS HEATER.
Please read the following information carefully before attempting to operate the heater and ensure all
members of your household understand how this elegant and highly efficient heater functions.
Please fill out and return the Warranty registration and installation
checklist card promptly.
These instructions should be stored in a convenient safe place for ready reference. If you have any
questions regarding your heater please contact your YUNCA LEEDZ dealer.
The YUNCA LEEDZ INBUILT FLUED GAS HEATER is a listed gas-fired, conventionally vented, room
heater tested by independent laboratories to New Zealand standards.
The installation of the YUNCA LEEDZ INBUILT FLUED GAS HEATER must be carried out by a suitably
qualified person and comply with the current New Zealand installation code, NZS 5261:1996. (For
Australian Installations, code AG 601)
CAUTION: This appliance must be vented to atmosphere via a sealed flue system. Installation and repair
of the YUNCA LEEDZ INBUILT VENTED GAS HEATER should be done by a qualified person. The
appliance should be serviced at least annually by a qualified service person. Control valve compartments,
burners, fan, and air circulating passageways of the Leedz must be kept free from any lint and dust build
up to ensure efficient and safe operation of the heater. Regular cleaning of the air intake filter will aid this.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS OPERATIONAL.
09-06-01 Page 3 of 3 op-instruct-leedz-ib.doc