Introduction - Yunca Gas EIB Operations, Maintenance & Warranty Information

INTRODUCTION.

Welcome and congratulations on purchasing your YUNCA ELECTRONIC INBUILT FLUED GAS
HEATER.
Please read the following information carefully before attempting to operate the heater and ensure all
members of your household understand how this elegant and highly efficient heater functions.
Please fill out and return the Warranty registration and installation check list
card promptly.
These instructions should be stored in a convenient safe place for ready reference. If you have any
questions regarding your heater please contact your YUNCA dealer.
The YUNCA ELECTRONIC INBUILT FLUED GAS HEATER is a listed gas-fired, conventionally
vented, room heater tested by independent laboratories to New Zealand standards.
The installation of the YUNCA ELECTRONIC INBUILT FLUED GAS HEATER must be carried out
by a suitably qualified person and comply with the current New Zealand installation code, NZS
5261:1996. (For Australian Installations, code AG 601)
CAUTION: This appliance must be vented to atmosphere via a sealed flue system. Installation and
repair of the YUNCA ELECTRONIC INBUILT VENTED GAS HEATER should be done by a
qualified person. The appliance should be serviced at least annually by a qualified service person.
Control valve compartments, burners, fan, and air circulating passageways of the ELECTRONIC
INBUILT must be kept free from any lint and dust build up to ensure efficient and safe operation of the
heater. Regular cleaning will aid this.
DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS
OPERATIONAL.
16-02-05 Page 3 of 19 Operation Instructions for Electronic InBuilt EIB 2002