Chapter 8 : Connecting External Devices; Connecting External Monitors - Sony PXW-X500 Manual

8 Connecting External Devices
Chapter
You can connect a control device such as an RM-B150/B170/B750 Remote Control Unit or RCP-1001/
1501 Remote Control Panel and operate this camcorder. For details about connection and operation of a
remote control unit, see "Operating via the REMOTE Connector" (page 85).

Connecting External Monitors

Select the output signal and use an appropriate cable for the monitor to be connected.
Regardless of whether the signal is HD or SD, the
same status information and menus can be
displayed on the external monitor as those on the
viewfinder screen.
BNC cable
(not supplied)
BNC cable (not supplied)
Note
The SD signal down-converted output is enabled when
Operation >Input/Output >Output Format in the setup
menu is set to 720×486i or 720×576i.
177