Saving And Loading Scene Files; Saving Scene Files; Loading Scene Files - Sony PXW-X500 Manual

Saving and Loading
Scene Files
Scene files allow you to save the following types
of data.
• Values set in the Paint menu
• Shutter speeds set in standard mode or ECS
mode
• White balance data
The data that is saved and loaded depends on the
setting of File >Scene File >Scene White Data
in the setup menu.
Scene files can be stored in internal memory on
the camcorder or on an SD card.
Scene files can also be loaded into the camcorder.
Insert a writable SD card (see page 69) into the
UTILITY SD card slot before proceeding.

Saving Scene Files

To save a scene file in internal memory
1
Select File >Scene File >Store Internal
Memory in the setup menu.
A scene file list screen appears.
If the File ID is set to "Standard" destination,
preconfigured standard settings are saved.
2
Turn the MENU knob to select a
destination, then press the knob.
The scene file is saved, overwriting any
existing file, in the selected destination.
3
Turn the MENU knob to select
[Execute] on the confirmation message
screen, then press the knob.
To save a scene file on an SD card
1
Select File >Scene File >Save SD Card
in the setup menu.
A scene file save destination screen appears.
2
Turn the MENU knob to select a
destination, then press the knob.
You can save files in rows with a File ID of
"No File." Selecting a row with a specified
File ID name will overwrite the selected file.
The File ID is generated automatically, but
you can modify it.
3
Turn the MENU knob to select
[Execute] on the confirmation message
screen, then press the knob.
To change the File ID
1
Select File >Scene File >File ID in the
setup menu.
A screen for editing the File ID appears.
2
Select characters and enter the File ID.
3
Turn the MENU knob to select [Done],
then press the knob.
The File ID is updated.

Loading Scene Files

To load a scene file from internal
memory
1
Select File >Scene File >Recall Internal
Memory in the setup menu.
A scene file list screen appears.
2
Turn the MENU knob to select a file to
load, then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select
[Execute], then press the knob.
To load a scene file from an SD card
1
Select File >Scene File >Load SD Card
in the setup menu.
A scene file list screen appears.
2
Turn the MENU knob to select a file to
load, then press the knob.
A confirmation screen appears.
172