Electric Color Temperature Filter - Sony PXW-X500 Manual

EX2D: Appears when both the lens extender
function and digital extender function (2×)
are ON
EX3D: Appears when both the lens extender
function and digital extender function (3×)
are ON
EX4D: Appears when both the lens extender
function and digital extender function (4×)
are ON
Turn the digital extender on/off using an
assignable switch assigned with the Digital
Extender function.
Note
The digital extender cannot be turned on when
Slow & Quick Motion is enabled.
b White balance mode indicator
Displays the currently selected white balance
automatic adjustment memory.
ATW: ATW (Auto Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:C: Memory C mode
W:P: Preset mode
3200K: Appears when an assignable switch
assigned with Color Temp SW 3200K is on
4300K: Appears when an assignable switch
assigned with Color Temp SW 4300K is on
5600K: Appears when an assignable switch
assigned with Color Temp SW 5600K is on
6300K: Appears when an assignable switch
assigned with Color Temp SW 6300K is on
c Zoom position indicator (with lens
mounted)
Displays the zoom position of the zoom lens in
the range 0 to 99.
d Color temperature indicator
Displays the color temperature of the white
balance.
e Focus position indicator (with lens
mounted)
Displays the focus position as a distance to the
subject (unit: meters).
f Electric color temperature filter
indicator
Appears when the CC5600K function is on.
g Iris position indicator (with lens
mounted)
Displays the iris position setting.
h Recording mode indicator
Displays the following recording operation states
of the camcorder.
Indicator Meaning
zRec During recording
Stby Recording standby
zCont Rec
Clip continuous recording in
progress
Cont Stby Recording standby in clip
continuous recording mode
zS&Q Rec Recording in progress in Slow &
Quick Motion mode
S&Q Stby Recording standby in Slow &
Quick Motion mode
zRec
Recording in picture cache mode
zCache
Recording standby in picture
cache mode (z is green)
zInt Rec
Recording in progress in Interval
Rec mode
Int Stby Recording standby in Interval Rec
mode
zInt Stby Recording paused in Interval Rec
mode
zSml Rec Recording in progress in Simul
Rec mode
Sml Stby Recording standby in Simul Rec
mode
CALL (red) Call received from external
connected device
Green tally indicator
Indicates when the camcorder is in the following
states.
• Maintenance >Camera Config >HD-SDI
Remote I/F is set to "Green Tally" in the setup
menu and a recording control signal is output
from the SDI OUT connector.
• Green tally signal received (when a camera
adaptor is mounted on the camcorder and a
camera extension unit is connected)
i Wireless receiver function indicator
Displays "W" when a slot-in receiver is attached
to the camcorder, and displays the reception level
for each channel that can be used by the receiver
(1ch, 2ch, or 4ch).
25