Managing/Editing Clips With A Computer; Using The Expresscard Slot Of A Computer - Sony PXW-X500 Manual

SDI OUT connector (BNC)
The SDI OUT connector can be used to connect a
device that supports SDI. The device type can be
a monitor, switcher, VTR, or other recording
device.
The output from this connector can be turned on
and off using Operation >Input/Output >SDI
Out1 Output/SDI Out2 Output in the setup menu
(see page 128).
For connection, use a BNC cable (not supplied).
VIDEO OUT connector
The VIDEO OUT connector can be used to
connect a device that supports analog composite
signals. The device type can be a monitor, VTR,
or other recording device.
The output signal is linked to the setting of
Operation >Input/Output >Output Format in the
setup menu.
To input the VIDEO OUT connector output
signal to an external analog composite device, it
may be necessary to change the input signal
setting of that external device to match the analog
composite signal setting for the VIDEO OUT
connector.
To input camcorder output audio to an external
device such as a monitor, VTR, or other recording
device, connect the audio output of the AUDIO
OUT connector to the audio input of that external
device.
For connection, use a BNC cable (not supplied).
HDMI OUT connector (Type A connector)
You can turn the output signal from the
camcorder on/off using Operation >Input/Output
>HDMI Output in the setup menu.
The output signal format is set using Operation
>Input/Output >Output Format in the setup menu.
Use a commercially available HDMI cable for
connection.
Managing/Editing Clips
with a Computer
The clips recorded on SxS memory cards with
this camcorder can be controlled on a computer or
edited using optional nonlinear editing software.
For these purposes, the clips on an SxS memory
card can be operated by directly loading the card
in a computer or by connecting the optional
SBAC-US30 SxS Memory Card USB Reader/
Writer to the computer, using an USB cable.
Using the ExpressCard Slot of a
Computer
If the computer is equipped with an ExpressCard/
34 or ExpressCard/54 slot, you can directly insert
the SxS memory card containing clips recorded
with this camcorder and access the files.
Notes
• The SxS Device Driver Software must be downloaded
and installed on your computer. For details about
downloading software, see "Software Downloads"
(page 11).
• Operation is not guaranteed with all computers.
For support information for the driver software, visit
the following URL:
http://www.sony.net/SxS-Support/
Insert in the
ExpressCard slot.
SxS memory card
On Windows
Check that a Removable Disk appears in My
Computer. This indicates normal status.
On Macintosh
An icon is displayed on the menu bar.
178
Computer with SxS
Device Driver
Software installed