Sony PXW-X500 Manual page 132

Operation
Item
VF Setting
Sets the viewfinder screen.
Marker
Sets the marker display in
the viewfinder.
Sub-item setting
Color
–99 to ±0 to +99
Color Mode
Color/B&W
Peaking Type
Peaking Frequency
Normal/High
Peaking Color
B&W/Red/Yellow/Blue
VF Detail Level
–99 to ±0 to +99
Setting
On/Off
Color
White/Yellow/Cyan/Green/
Magenta/Red/Blue
Center Marker
1/2/3/4/Off
Safety Zone
On/Off
Safety Area
80%/90%/92.5%/95%
Aspect Marker
Line/Mask/Off
Aspect Select
15:9/14:9/13:9/4:3/1.66:1/1.85:1/
2.35:1/2.4:1
132
Description
Adjusts the color depth of the viewfinder
image.
Selects the viewfinder display mode
(when using CBK-VF02).
Color: Color
B&W: Black & white
Selects the type of peaking (when using
CBK-VF02).
Normal: Normal peaking
Color: Color peaking
When Peaking Type is set to Normal, this
selects Normal or High peaking
frequency (when using CBK-VF02).
Selects the peaking color when Peaking
Type is set to Color (when using CBK-
VF02).
B&W: Black & white
Red: Red
Yellow: Yellow
Blue: Blue
Sets the detail level (set on the
camcorder) of the viewfinder (when
using HDVF-20A).
Turns the display of all markers on/off.
Note
When Marker is assigned to the ASSIGN. 2
switch, this setting is disabled.
Selects the marker display color.
When the center marker is displayed,
selects the type. Select Off if you do not
want to display the marker.
Turns the safety zone indicator on/off.
Selects the safety zone range.
When an aspect marker is to be
displayed, selects the display method.
Select Off if you do not want to display
the marker.
Line: Show as white lines.
Mask: Displays a lower video signal
level for areas outside the marker area.
Selects the aspect ratio of the marker.