Sony PXW-X500 Manual page 149

Maintenance
Item
Battery
Makes settings related to
batteries.
DC Voltage Alarm
Sets alarms relating to
external DC supply
voltage.
Audio
Makes settings related to
audio.
Sub-item setting
Near End: Info Battery
5%/10%/15%...95%/100%
End: Info Battery
0%/1%/2%/3%/4%/5%
Near End: Sony Battery
11.5V to 17V (0.1V steps)
End: Sony Battery
11.0V to 11.5V (0.1V steps)
Near End: Other Battery
11.5V to 11.8V to 17.0V
(0.1V steps)
End: Other Battery
11.0V to 14.0V (0.1V steps)
Detected Battery
Sony Info Battery/
Sony Battery/Other Battery/
DC IN
DC Low Voltage1
11.5V to 17V (0.1V steps)
DC Low Voltage2
11.0V to 14.0V (0.1V steps)
Front MIC Select
Mono/Stereo
Rear XLR Auto
On/Off
Front MIC CH1 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Front MIC CH2 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Rear MIC CH1 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Rear MIC CH2 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Line Input Ref
+4dB/0dB/–3dB/EBUL
149
Description
Sets the threshold value for displaying the
"Battery Near End" warning when using a BP-
GL65/GL95 battery pack.
Sets the threshold value for displaying the
"Battery End" warning when using a BP-GL65/
GL95 battery pack.
Sets the threshold value for displaying the
"Battery Near End" warning when using a BP-
L60S/L80S battery pack.
Sets the threshold value for displaying the
"Battery End" warning when using a BP-L60S/
L80S battery pack.
Sets the threshold value for displaying the
"Battery Near End" warning when using a non-
Sony battery pack.
Sets the threshold value for displaying the
"Battery End" warning when using a non-Sony
battery pack.
Displays the result of automatic battery pack
type detection.
Sets the threshold value for displaying the
"Battery Near End" warning when using an
external power source connected to the DC IN
connector.
Sets the threshold value for displaying the
"Battery End" warning when using an external
power source connected to the DC IN connector.
Selects whether the front microphone is
monaural (Mono) or stereo (Stereo).
Turns the automatic detection function on/off for
detecting cable connections on the AUDIO IN
CH-1/CH-2 connectors on the rear panel.
Selects the reference level of the front
microphone for channel 1.
Selects the reference level of the front
microphone for channel 2.
Selects the reference input level when the
AUDIO IN CH1 switch is set to MIC.
Selects the reference input level when the
AUDIO IN CH2 switch is set to MIC.
Selects the reference input level when the
AUDIO IN CH1 and AUDIO IN CH2 switches
are set to LINE.