Sony PXW-X500 Manual page 180

To remove an SxS memory card
On Windows
1
Click on the "Safely Remove
Hardware" icon on the task bar of the
computer.
2
Select "Safely remove SxS Memory
Card - Drive(X:)" from the displayed
menu.
3
Check that the "Safe To Remove
Hardware" message appears, then
remove the card.
On Macintosh
Drag the SxS memory card icon on the desktop to
the Trash.
If the SxS memory card icon is displayed in the
Finder, click on the eject icon.
To use the application software
To copy clips to the local disk of your computer,
the dedicated application software must be
downloaded and installed on your computer. For
details about downloading software, see
"Software Downloads" (page 11).
Although the data regarding recorded materials
are stored over multiple files and folders, you can
easily handle the clips without considering such
data and directory structure by using the
dedicated application software.
Note
If you operate, e.g. copy the clips on the SxS memory
card by using Explorer (Windows) or Finder
(Macintosh), the subsidiary data contained by the clips
may not be maintained.
To use a nonlinear editing system
In a nonlinear editing system, editing software
(option) that supports the formats recorded by the
camcorder is required.
Store the clips to be edited on the HDD of your
computer in advance, using the supplied
application software.
Some editing software may not operate properly.
Be sure to confirm before use that it conforms to
the recording formats used with this camcorder.
180