output terminal of the BC-L70, BC-L160,
BC-L500, or another battery charger.
d DC OUT 12V (DC power output)
connector (4-pin, female)
Supplies power for an optional WRR-855S/860C/
861/862 UHF Synthesized Diversity Tuner or
HDVF-750/L770 Viewfinder (maximum 1.8 A).
Do not connect any equipment other than the UHF
synthesized diversity tuner.
e Battery attachment shoe
Attach a BP-L80S Battery Pack. Alternatively,
you can attach an AC-DN2B/DN10 AC Adaptor
to operate the camcorder from an AC power
For details, see "Preparing a Power Supply"
For details, see "Attaching a UHF Portable Tuner
(for a UHF Wireless Microphone System)"
For your safety, and to ensure proper operation of the
camcorder, Sony recommends the use of the BP-L80S
f Camera adaptor connector
Enables connection of a CA-TX70/FB70 HD
Camera Adaptor. To connect an adaptor, remove
a Shoulder strap fitting
Attach the supplied shoulder strap (see page 44).
b Accessory shoe
Attach an optional accessory, such as a video
light (see page 44).
c Viewfinder front-to-back positioning
Adjust the viewfinder position in the front-to-
back direction (see page 33).
d Viewfinder left-to-right positioning ring
Loosen this ring to adjust the left-to-right position
of the viewfinder (see page 33).
e Viewfinder attachment shoe
Attach the viewfinder (see page 32).
f VF (viewfinder) connectors (26-pin,
rectangular and 20-pin, round)
The analog interface connector (20-pin) is for
connection of an HDVF series viewfinder, and
the digital interface connector (26-pin) is for
connection of a CBK-VF02 HD viewfinder.
Use a connection cable to connect your
viewfinder to the corresponding connector.
Do not connect viewfinders to both connectors at the