Sony PXW-X500 Manual page 91
Solid-state memory camcorder
Hide thumbs
Also See for PXW-X500:
- Service manual (184 pages) ,
- Operation manual (181 pages) ,
- Quick start manual (5 pages)
Table of Contents
Advertisement
4
Attach the protective cap (supplied) to
the USB connector of the USB extension
adaptor.
5
Open the cover of the USB wireless
LAN module connector.
For attachment of the guard, contact a Sony
service representative.
Guard (supplied)
6
Plug the USB connector of the USB
extension adaptor into the USB wireless
LAN module connector.
7
Plug the CBK-WA02 into the USB
connector of the USB extension
adaptor.
8
Set the wireless LAN channel in
Maintenance >Network >Channel in
the setup menu (see page 157).
For details about using the CBK-WA02, refer to the
instruction manual supplied with the CBK-WA02.
Notes
• Always turn the camcorder off before connecting or
removing the CBK-WA02.
• Attaching a CBK-WA02 and selecting “Wi-Fi Station”
in Maintenance >Network >Setting in the setup menu
enables connection to a 5 GHz access point.
• The Ch setting “Auto(5GHz)” in Wi-Fi Access Point
mode may not be displayed, depending on the CBK-
WA02 used.
• “Auto(5GHz)” is not displayed in the menu if use of
the CBK-WA02 in the 5 GHz band is prohibited for
outdoor use in your country or region. Check that the
use of the CBK-WA02 is permitted in your country or
region. For details, refer to the CBK-WA02 operation
manual.
If not using the CBK-WA02
Do not attach the guard.
Page 91
- Quick Links:
- Setting the Video Format
Hide quick links:
Advertisement
Table of Contents
