Proxy Format Settings; Wireless Lan Station Settings - Sony PXW-X500 Manual

Solid-state memory camcorder
Hide thumbs Also See for PXW-X500:
Table of Contents

Advertisement

Item
Description
Destination
Enter the
Address
address of the
transmission
destination
server for
streaming data.
Destination
Enter the port
Port
number of the
transmission
destination
server used for
streaming.
Notes
• When Streaming is set to On, the monitoring function
cannot be used.
• Audio/video data is transmitted as-is via the Internet.
Accordingly, the data may be disclosed to other
parties.
Always check that the transmission destination can
receive the streaming data.
The data may be sent to an unintended party if the
address or other settings are configured incorrectly.
• Not all frames may be played, depending on the status
of the network.
• The picture quality may deteriorate in scenes with
excessive motion.
• Not all frames may be played when the stream is set to
a large size with a small bit rate.
To reduce this, select a smaller size for the Size setting.

Proxy Format Settings

You can set the format of the proxy file that is
recorded on the SD card of the camcorder.
Video
• XAVC Proxy (AVC/H.264 Main Profile, 4:2:0
Long GOP)
• Size is selected in the following settings.
Audio
• AAC-LC compression
• Sampling frequency: 48 kHz
• Bit rate: 128 kbps for stereo
Setting
Host name or IP
address
1 to 65535
106
Item
Description
Proxy File
Sets the video
recording
size and bit rate
Size
for proxy files.
Proxy File
Displays the
recording
video frame
Frame
rate for proxy
Rate
files.
Proxy File
Displays the
recording
video bit rate
Bit Rate
for proxy files.
Proxy File
Sets the audio
recording
channel to
Audio
record to proxy
Channel
data.
Select
Notes
• The bit rate is an average value, so this value may be
exceeded at times.
• 24 fps is not supported.

Wireless LAN Station Settings

Use the Station Settings tab of the Settings screen
to make settings for connecting the camcorder to
a wireless LAN.
Item
Description
Host Name
Name of the camcorder (can be
modified)
SSID
Displays the SSID selected in
[Access Point].
Key
Enter the password for the
access point.
Setting
1280×720 (9Mbps)/
1280×720 (6Mbps)/
640×360 (3Mbps)/
480×270 (1Mbps)/
480×270 (0.5Mbps)
23.98fps/25fps/
29.97fps/50fps/
59.94fps
9Mbps (VBR)/
6Mbps (VBR)/
3Mbps (VBR)/
1Mbps (VBR)/
0.5Mbps (VBR)
Ch-1 & Ch-2/
Ch-3 & Ch-4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents