Connecting Using A Modem; Connecting Using A Lan Cable - Sony PXW-X500 Manual

4
Attach the protective cap (supplied) to
the USB connector of the USB extension
adaptor.
5
Open the cover of the USB wireless
LAN module connector.
For attachment of the guard, contact a Sony
service representative.
6
Plug the USB connector of the USB
extension adaptor into the USB wireless
LAN module connector.

Connecting Using a Modem

You can connect the camcorder to the Internet via
a 3G/4G network by attaching an optional modem
to the camcorder using an optional CBK-NA1
Network Adaptor.
Guard (supplied)
Connecting
1
Connect the modem (option) to the USB
connector of the CBK-NA1E USB
extension adaptor.
For details about connecting a modem, refer to
the instruction manual supplied with the
modem.
2
Select "Modem" in Maintenance
>Network >Setting in the setup menu.
Notes
• Always turn the camcorder off before connecting or
removing the CBK-NA1 and modem.
• It may take some time (30 seconds to 1 minute) to
enable modem mode. Wait until the "3G/4G" network
status indicator (see page 29) stops flashing on the
LCD screen or in the viewfinder.

Connecting Using a LAN Cable

You can connect to the Internet by attaching an
optional CBK-NA1 Network Adaptor to the
camcorder, and connecting to an Internet router
using a LAN cable.
95
Internet
CBK-NA1
+
Modem