Sony PXW-X500 Manual page 63

Display item Description
Proxy Recording Proxy data recording function
Mode on/off
Video Output Status screen
Display item Description
SDI SDI OUT connector output
settings (output picture size,
output form, output rate,
superimposition)
HDMI HDMI connector output
settings (output picture size,
output form, output rate,
superimposition)
Video VIDEO OUT connector
output settings (output picture
size, superimposition)
Network Status screen
Display item Description
Setting Network setting status
Device Name Name of device attached to the
USB wireless LAN module
connector
IP Address Network IP address
Wired LAN Displays the remote control
Remote enabled/disabled state when
connected using a LAN cable
CCM Name Name of the connected CCM
when using network client
mode
Streaming Status Streaming distribution status
Streaming Size Picture size of the currently
selected streaming setting
Display item
Streaming Bit
Rate
Streaming Type
NW Client Mode
Status
Number of
Distribution
Streaming Dest.
Add.
Streaming Dest.
Port
Network client mode status description
Status State
display
Off CCM not
connected
Connected CCM
connected
Connecting Connecting to
CCM
(disconnected)
Awaiting CCM
connection
standby
Address CCM
Error address
error
Auth. Failed CCM
user
name/
password
error
63
Description
Bit rate of the currently
selected streaming setting
Type of the currently selected
streaming setting
Network client mode status
See "Network client mode
status description" below for a
detailed description.
Number of streaming
distribution destinations
Streaming destination address
Streaming destination port
Description
Network client mode is
off.
Network client mode is
on, CCM is connected,
and CCM control is
enabled.
Attempting to connect to
CCM (or disconnecting).
Wait until connection
(disconnection) is
successful. If the status
does not change from
"Connecting," the CCM
address setting may be
incorrect. Check that the
address is set correctly.
Network client mode is
on, but the network
setting is off. Enable the
network setting to
connect to the CCM.
The host name or IP
address of the CCM to
connect may be
incorrect. Check that the
setting is correct.
The user name or
password used to connect
to the CCM may be
incorrect. Check that the
setting is correct.