Sony PXW-X500 Manual page 128

Operation
Item
Format Media
Formats the media.
Input/Output
Sets input/output signals.
Sub-item setting
Media (A)
Execute/Cancel
Media (B)
Execute/Cancel
SD Card(Utility)
Execute/Cancel
SD Card(Proxy)
Execute/Cancel
Output Format
Settings vary according to the
system frequency setting.
Source Select
Camera/External
SDI Out1 Output
On/Off
SDI Out2 Output
On/Off
HDMI Output
On/Off
SDI Out2/HDMI Super
Off/On
Video Out Super
Off/On
Down Converter
Edge Crop/Letter Box/Squeeze
Wide ID
Through/Auto
128
Description
Initializes the SxS memory card in slot A
(execute by selecting Execute).
Initializes the SxS memory card in slot B
(execute by selecting Execute).
Initializes the SD card in the UTILITY
SD card slot (execute by selecting
Execute).
Initializes the SD card in the PROXY SD
card slot (execute by selecting Execute).
Selects the input format (execute by
selecting Execute).
Settings vary according to the recording
format setting (see page 127).
Selects the camera picture (Camera) or
SDI IN connector input signal for the
video input source.
Turns the output signal from the SDI
OUT1 connector on/off.
Turns the output signal from the SDI
OUT2 connector on/off.
Turns the output signal from the HDMI
connector on/off.
Turns character information
(superimposed) from the SDI OUT2
connector on/off.
Turns character information
(superimposed) from the VIDEO OUT
connector on/off.
Selects the signal conversion mode for
output of SD signals.
Edge Crop: Crops the edges of the 16:9
picture for output as a 4:3 picture.
Letter Box: Masks the top and bottom
of the 4:3 picture and displays a 16:9
picture in the center of the screen.
Squeeze: Squeezes the 16:9 picture
horizontally for output as a 4:3 picture.
Selects whether to add a wide ID signal
to the SD output signal.
Through: Outputs without adding a
wide ID signal.
Auto: Adds and outputs a wide ID signal
to the video signal when the wide ID
signal is set to Squeeze.