Sony PXW-X500 Manual page 99

Notes
• Margins of up to 15 frames are added before and after
the cutout region in the created file.
• Files created from cutouts from proxy files recorded
using network function software (V1.25 or earlier)
may not be imported into non-linear editors.
To transfer original files on SxS memory
cards
1
Select Maintenance >File Transfer
>File Transfer in the setup menu.
2
Turn the MENU knob to select
[Execute], then press the knob.
File transfer mode is initiated.
3
Connect the camcorder and device
using a LAN connection, then launch a
browser on the device to connect to the
camcorder (see page 89).
4
Display a file list screen to select files.
5
Tap and select [Media Info], then
tap Slot A (for files recorded on media
in slot A) or Slot B (for files recorded on
media in slot B).
The Slot A or Slot B screen appears.
Example: Slot A screen
6
Select the files you want to transfer.
Tap a file to select it. Tap a file a second time
to de-select it.
7
Tap [Transfer to:].
The default destination server specified in
[Default Setting] appears (see "To register a
new destination server" (page 108)).
To change the destination server, tap the
destination server to display a list and then
select a different server.
Enter the directory on the destination server
in [Directory].
8
Tap [Transfer].
Transfer of the selected files begins. To
cancel file transfer, tap [Cancel].
Note
Files cannot be transferred under the following
conditions.
• During recording, playback, or when displaying the
thumbnail screen
• When the wireless LAN access point is set to Wi-Fi
Access Point mode
To monitor the file transfer
Tap [Job List] on the SD Card, Slot A, or Slot B
screen to display the Job List screen to check the
status of the file transfer (see page 108).
99