Motorola 2200 Administrator's Handbook page 238

Administrator's Handbook
==== vlan active link ====
namePtr
portType : 3
portIndex : 3
ifId
==== vlan active link ====
namePtr
portType : 3
portIndex : 4
ifId
==== vlan active link ====
namePtr
portType : 3
portIndex : 5
ifId
show wireless [all]
Shows wireless status and statistics.
show wireless clients [ MAC_address ]
Displays details on connected clients, or more details on a particular client if the MAC address is added as
an argument.
telnet { hostname | ip_address } [ port ]
Lets you open a telnet connection to the specified host through your Motorola Netopia® Gateway.
•
The hostname argument is the name of the device to which you want to connect; for example,
ftp.netopia.com
.
•
The ip_address argument is the IP address, in dotted decimal notation, of the device to which you
want to connect.
•
The port argument is the number of t he port over which you want to open a telnet session.
traceroute ( ip_address | hostname )
Traces the routing path to an IP destination.
upload [ server_address ] [ filename ] [confirm]
Copies the current configuration settings of the Motorola Netopia® Gateway to a TFTP (Trivial File Transfer
Protocol) server. The TFTP server must be accessible on your Ethernet network. The server_address
argument identifies the IP address of the TFTP server on which you want to store the Motorola Netopia®
Gateway settings. The filename argument identifies the path and name of the configuration file on the
TFTP server. If you include the optional
not you want to perform the operation.
view config
Dumps the Motorola Netopia® Gateway's configuration just as the
238
: ethernet0/1
: 91
: ethernet0/2
: 92
: ethernet0/3
: 93
confirm keyword, you will not be prompted to confirm whether or
view command does in config mode.
telnet