Associating A Filter Set With An Interface - Motorola 2200 Administrator's Handbook

Administrator's Handbook

Associating a Filter Set with an Interface

Once you have created a filter set, you must associate it with an interface in order for it to be effective.
Depending on its application, you can associate it with either the WAN (usually the Internet) interface or the
LAN.
To associate an filter set with the LAN, return to the Filter Sets page.
Ethernet 100BT
Click the
The Ethernet 100BT page appears.
Click the Alert icon to go to the validation page, where you can save your configuration.
You can repeat this process for both the WAN and LAN interfaces, to associate your filter sets.
176
link.
From the pull-down menu, select the filter set to associate with this
interface.
Submit
Click the
corner of the page.
When you return to the Filter Sets page, it will display
your interface associations.
button. The Alert icon will appear in the upper right