Packet Filtering Settings - Motorola 2200 Administrator's Handbook

Motorola gateways administrator's handbook
Hide thumbs Also See for 2200:
Table of Contents

Advertisement

Administrator's Handbook

Packet Filtering Settings

Packet Filtering has two parts:
Create/Edit/Delete Filter Sets, create/edit/delete rules to a Filter Set.
Associate a created Filter Set with a WAN or LAN interface
See
"Packet Filter" on page 163
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
forward [ on | off ]
Creates or edits a filter rule, specifying whether packets will be forwarded or not.
NOTE:
If this is the first rule, it will create the filter-set called filterset-name, otherwise it will edit the
filterset.
If the index is not consecutive, the system will select the next consecutive index. If the index
does not exist, a rule will be created. If a rule exists, the rule will be edited.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
idle-reset [ on | off ]
Turns idle reset on or off for the specified filter rule. A match on this rule resets idle-timeout status and
keeps the WAN connection alive. The default is off. For idle-reset to be displayed, forward must be
enabled on a filter rule.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
frc-rte [ on | off ]
Turns forced routing on or off for the specified filter rule. A match on this rule will force a route for packets.
The default is off. For frc-rte to be displayed, forward must be enabled on a filter rule.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
gateway ip_addr
Specifies the gateway IP address for forced routed packets, if forced routing is enabled.
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
src-ip ip_addr
Specifies the source IP address to match packets (where the packet was sent from).
set security pkt-filter filterset filterset-name [ input_filter | output_filter ] index
src-mask mask
Specifies the source IP mask to match packets (where the packet was sent from).
294
for more information.

Advertisement

Table of Contents
loading

Table of Contents