Home Page - Motorola 2200 Administrator's Handbook

Administrator's Handbook

Home Page

The home page displays basic information about the Gateway. This includes the ISP Username, Connection
Status, Device Address, Remote Gateway Address, DNS-1, and DNS-2. If you are not able to connect to the
Internet, verify the following:
Item
Local WAN IP Address
Remote Gateway
Address
Status of Connection
ISP Username
Device Address
208
This is the negotiated address of the Gateway's WAN interface. This
address is usually dynamically assigned.
This is the negotiated address of the remote router to which this Gate-
way is connected.
'Waiting for DSL' is displayed while the Gateway is training. This
should change to 'Up' within two minutes. If not, make sure an RJ-11
cable is used, the Gateway is connected to the correct wall jack, and
the Gateway is not plugged into a micro filter.
'No Connection' is displayed if the Gateway has trained but failed the
PPPoE login. This usually means an invalid user name or password.
Go to Expert Mode and change the PPPoE name and password.
'Up' is displayed when the ADSL line is synched and the PPPoE (or
other connection method) session is established.
'Down' is displayed if the line connection fails.
This should be the valid PPPoE username. If not, go to Expert Mode
and change to the correct username.
This is the negotiated address of the Gateway's WAN interface.
This address is often dynamically assigned. Make sure this is a valid
address.
If this is not the correct assigned address, go to Expert Mode and ver-
ify the PPPoE address has not been manually assigned.
Description