Motorola 2200 Administrator's Handbook page 111

•
VLAN ID – If you select Global as the VLAN Type, the VLAN ID field appears for you to enter a VID. This
must be a unique identifying number between 1 and 4094. (A VID of zero (0) is permitted on the Ether-
net WAN port only.)
•
Admin Restricted – If you want to prevent administrative access to the Gateway from this VLAN, check
the checkbox.
•
802.1p Priority Bit: If you set this from the pull-down menu to a value greater than 0, all packets of this
VLAN with unmarked priority bits (pbits) will be re-marked to this priority.
Submit
Click the button.
The VLAN Port Configuration screen appears.
•
Port interfaces available for this VLAN are listed in the left hand column.
•
Displayed port interfaces vary depending on the kinds of physical ports on your Gateway, for example,
Ethernet, USB, and/or wireless.
Also, if you have multiple wireless SSIDs defined, these may be displayed as well (See Enable Multiple
Wireless IDs on page
•
For Motorola Netopia® VGx technology models, separate Ethernet switch ports are displayed and may
be configured.
To enable any of them on this VLAN, check the associated Enable checkbox(es).
Typically you will choose a physical port, such as an Ethernet port (example: eth0.1) or a wireless SSID
(example: ssid1).
•
When you enable an interface, the Tag, Priority, and Promote checkboxes and an 802.1p Priority Bit
pull-down menu appear for that interface.
59)
111