Pinhole Configuration Procedure - Motorola 2200 Administrator's Handbook

Administrator's Handbook
Pinhole Configuration Procedure.
From the Configure
1.
Since Port Forwarding is required for this example, the Motorola Netopia® embedded Web server is con-
figured first.
☛
NOTE:
The two text boxes, Web (HTTP) Server Port and Telnet Server Port, on this page refer to
the port numbers of the Motorola Netopia® Gateway's embedded administration ports.
To pass Web traffic through to your LAN station(s), select a Web (HTTP) Port number that is greater than
1024. In this example, you choose 8100.
Type 8100 in the Web (HTTP) Server Port text box.
2.
Click the Submit
3.
Click Advanced. Select the
4.
Click Add. Type your specific data into the Pinhole Entries table of this page. Click
5.
mit.
84
Use the following steps:
toolbar button ->
button.
Pinholes link to go to the Pinhole page.
Advanced link, select the Internal Servers link.
Sub-