Table of Contents
Advertisement
INSTALLATION OF THIS FAN SHOULD BE DONE ONLY BY A QUALIFIED INSTALLER
WARNING: MAKE SURE HOUSEHOLD BREAKER IS SHUT OFF PRIOR TO WORKING ON ANY ELECTRICAL LINES.
WARNING: THIS APPLIANCE IS EQUIPPED WITH A THREE-PRONG (GROUNDING) PLUG FOR PROTECTION AGAINST SHOCK HAZARD AND
SHOULD BE PLUGGED DIRECTLY INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. DO NOT CUT OR REMOVE
IMPORTANT: If installing a fan, it is easier to complete before the control board is connected to the gas line.
NOTE: This appliance must be electrically grounded and connected in accordance with local codes, or in the absence of local codes, with the National Electrical
Code, ANSI/NFPA 70 Current Edition, or the Canadian electrical Code CSA C22.1.
The following components must be removed from fireplace prior to installation of this fan. Refer to corresponding pages in this installation
manual for assistance if necessary: face frame, glass frame assembly.
1.
Insert fan through right side of lower grill opening , push to back wall.
2.
Plug cord into receptacle marked FAN on extension module.
3.
Re-install glass frame assembly and face frame.
OPTIONAL FAN INSTALLATION
PAGE 12
- Quick Links:
- Replacement Parts List
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
