Gearshift Selector (Se6 Model); Brake Pedal - Can-Am SPYDER F3TM 2016 Operator's Manual

Lift up or press down fully to move se-
quentially from one gear to the next.
When the lever is released, it returns
to center where the mechanism resets
for the next shift up or down. Neutral
(N) is selected by either a half lift from
first gear or a half press from second
gear.
NOTE: To shift from neutral to first
gear, press the brake and shift to first
gear.
To shift into reverse, refer to the
ATING IN REVERSE
DURES
subsection for detailed instruc-
tions.
5) Gearshift Selector
(SE6 Model)
The gearshift selector is below the left
handgrip.
rmo2015-008-011_a
TYPICAL
1. Gearshift selector
Press selector forward to upshift. Pull
selector toward you to downshift.
rmo2015-008-012_a
TYPICAL
1. Upshift
2. Downshift
OPER-
BASIC PROCE-
in
_______________
This shifts sequentially from one gear
to the next. Release the selector after
shifting.
To shift through multiple gears, use the
selector multiple times.
To shift into neutral from first gear or
reverse, briefly press or pull the gear
selector. A longer activation will shift
over neutral.
When the gearshift selector is re-
leased, the mechanism resets for the
next shift up or down.
If operator does not downshift when
slowing down and engine RPM drops
below a threshold value, the gearbox
will automatically downshift to the
next available gear.
If the engine is started with the gear-
box in gear, it will automatically shift to
neutral position.

6) Brake Pedal

The brake pedal is in front of the right
footrest. Press it down to operate.
This pedal brakes all three wheels.
rmo2015-008-030_a
1. Brake pedal
2. Footrest
NOTE: When riding, make sure not
to lean your foot on brake pedal. Oth-
erwise, the engine management will
activate the limp home mode to pro-
tect the braking system.
PRIMARY CONTROLS
13