Can-Am SPYDER F3TM 2016 Operator's Manual page 26

MULTIFUNCTION GAUGE CLUSTER
3. Press down arrow to select 12:00
AM PM or up arrow to select 24:00
time base.
4. If 12:00 AM PM time base is se-
lected, AM PM is displayed in upper
LCD.Press up or down arrow to se-
lect A (AM) or P (PM).
5. Press on the right arrow to display
Hr in upper LCD. The hour number
flashes in the lower LCD. Press up
or down arrow to select the applica-
ble hour value.
6. Press on the right arrow to display
Min in upper LCD. The minute num-
ber flashes in the lower LCD. Press
up or down arrow to select the ap-
plicable minute value.
NOTE: For each up or down arrow
press, the unit value will change by
1. Pressing the down arrow while the
number indicated is 0 will start the list
from the highest value applicable for
this function.
7. When completed, press the right ar-
row to exit the menu.
NOTE: You can always return to previ-
ous selection using the left arrow.
Setting Language
The gauge display language can be
changed. Refer to an authorized
Can-Am roadster dealer for language
availability and setup the gauge to your
preference.
______________
24