10) Reverse Button - Can-Am SPYDER F3TM 2016 Operator's Manual

SECONDARY CONTROLS
rmo2010-001-021_a
RECC BUTTONS
1. ECO/MODE button
2. SET button
3. UP button
4. DOWN button
5. LEFT button
6. RIGHT button
WARNING
Using the RECC while driving can
distract the driver from operating
the vehicle. Always use buttons
with caution and always keep your
eyes on the road.
1) ECO/MODE Button
Hold this button for more than 2 sec-
onds to activate or deactivate ECO
mode.
ECO MODE indicator lamp will be ON.
2) SET Button
Quick press then release: Navigates
through the main digital display.
Pressing and holding button: Enters
the unit setting in the menu display.
3) UP Button
Use this button to increase the value.
4) DOWN Button
Use this button to decrease the value.
Press and hold to reset a value.
5) LEFT Button
Move the screens arrows to the left to:
______________
20
Navigate through screens
Select a secondary menu or a setting.
6) RIGHT Button
Move the screens arrows to the left to:
Navigate through screens
Select a secondary menu or a setting.

10) Reverse Button

Reverse button
The reverse button is located near the
left handgrip.
rmo2015-008-040_b
1. Reverse button
Push and hold the reverse button to al-
low shifting into reverse. Refer
ATING IN REVERSE
DURES
subsection for detailed instruc-
tions.
The vehicle backup light will turn ON
when the vehicle is in reverse.
R
OPER-
BASIC PROCE-
in