5.
Press the lever that secures the assembly to the chassis (1), pivot the assembly forward toward the
front of the computer (2), and then lift the assembly straight up and out of the computer (3).
Figure 6-37
To reinstall the front fan, reverse the removal procedure.
Front I/O Assembly
Description
Front I/O assembly
1.
Prepare the computer for disassembly
2.
Remove the computer access panel
3.
Remove the front bezel
4.
Remove the front fan
5.
Disconnect the three front I/O cables (yellow, green, and blue) from the system board connectors
(FRONT USB, FRONT USB2, and FRONT AUD).
86
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Removing the front fan assembly
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Bezel on page
(Front Fan Assembly on page
56).
85).
Spare part number
646827-001
54).
55).