HP Compaq Pro 6305 Maintenance And Service Manual page 27

Table 3-4 Computer Setup—Security (continued)
Device Security
Allows you to set Device Available/Device Hidden (default is Device Available) for:
●
●
●
●
●
●
●
USB Security
Allows you to set Enabled/Disabled (default is Enabled) for:
●
●
●
Slot Security
Allows you to disable any PCI or PCI Express slot. Default is enabled.
Network Boot Enables/disables the computer's ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.) Default is enabled.
System IDs
Allows you to set:
●
●
●
●
Embedded security device
System audio
USB controller (varies by model)
Network controller
NOTE: You must disable AMT before trying to hide the network controller.
Serial port
Parallel port
SATA ports (varies by model)
Front USB Ports
Rear USB Ports
Accessory USB Ports
Asset tag (18-byte identifier), a property identification number assigned by the company to the
computer.
Ownership tag (80-byte identifier) displayed during POST.
Universal Unique Identifier (UUID) number. The UUID can only be updated if the current
chassis serial number is invalid. (These ID numbers are normally set in the factory and are used
to uniquely identify the system.)
Keyboard locale setting for System ID entry.
Computer Setup (F10) Utilities
17