System Board - HP Compaq Pro 6305 Maintenance And Service Manual

7.
Pull the power supply forward until the posts on the power supply move forward in the power
supply bracket, and then lift the power supply straight up and out of the chassis.
Figure 7-47
To install the power supply, reverse the removal procedure.
CAUTION:
are not cut by the drive cage and are not pinched by the rotating power supply.

System Board

Description
System board for use in Windows 7 models (includes thermal material)
System board for use in Windows 8 Standard models
System board for use in Windows 8 Professional models
1.
Prepare the computer for disassembly
2. Remove the access panel
3.
When replacing the system board, make sure the following components are removed from the
defective system board and installed on the replacement system board:
Memory modules
●
Expansion cards
●
Removing the power supply
When installing the power supply cables, make sure they are properly positioned so they
(Access Panel on page
(Memory on page
(Expansion Card on page
(Preparation for Disassembly on page
100).
105)
109)
Spare part number
703596-001
703596-501
703596-601
99).
System Board
143