Power Switch/Led Assembly - HP Compaq Pro 6305 Maintenance And Service Manual

6.
Remove the Torx T15 screw that secures the assembly to the chassis.
Figure 6-38
7.
Rotate the left side of the assembly to the right .
Figure 6-39
8.
Pull the assembly away from the computer while threading the wires through the hole in the front
of the chassis.
To reinstall the assembly, reverse the removal procedure.

Power Switch/LED Assembly

Description
Power switch/LED assembly
1.
Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4.
Remove the front fan
5. Disconnect the cable from the system board connector labeled PB/LED.
Removing the front I/O assembly screw
Removing the front I/O assembly
(Preparation for Disassembly on page
(Computer Access Panel on page
(Front Bezel on page
(Front Fan Assembly on page
55).
56).
85).
Power Switch/LED Assembly
Spare part number
646828-001
54).
87