Igmp Configuration; Configuring Basic Igmp Parameters - Zte ZXA10 F660 User Manual

ZXA10 F660 User Manual
Parameter
Secondary NTP Server
Address
Poll Interval
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The SNTP client is configured.

6.7 IGMP Configuration

This topic includes the following:
l

Configuring Basic IGMP Parameters

l
Configuring Multicast VLAN
l
Configuring Multicast MAC Limit
l Configuring MVLAN Tag Strip
6.7.1 Configuring Basic IGMP Parameters
Short Description
Perform this procedure to configure the basic IGMP parameters.
Prerequisites
The user has logged in to the Web interface of the device.
Context
To configure the basic
Steps
1. On the Application tab, select IGMP. By default, Basic is selected, as shown in
6-29.
SJ-20110718111034-001|2011-07-18 (R1.0)
Description
IP address of the secondary NTP server
Interval for server synchronization
Unit: second
IGMP parameters, perform the following steps:
6-28
ZTE Proprietary and Confidential
Figure