ZXA10 F660 User Manual
Context
To configure the
Steps
1. On the Application tab, select VoIP, and then select Advanced, as shown in
6-5.
Figure 6-5 Advanced Parameters
2. Configure the advanced parameters, as shown in
Table 6-3 Advanced Parameters
Parameter
Echo Cancellation
VAD&CNG
DTMF
Jitter Buffer
Min Value
Max Value
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
SJ-20110718111034-001|2011-07-18 (R1.0)
VoIP
advanced parameters, perform the following steps:
Description
To enable or disable echo cancellation
To enable or disable
DTMF
Voice
Jitter buffer, including fixed and adaptive
Minimum jitter buffer value
Unit: ms
Maximum jitter buffer value
Unit: ms
6-6
Table
6-3.
VAD
and
CNG
mode, including RFC2833, RFC2198, and DTMF in
ZTE Proprietary and Confidential
Figure