Zte ZXA10 F660 User Manual page 53

Figure 5-2 IP Filter
Table 5-2
Table 5-2 Parameters for IP Filter Configuration
Parameter
Enable
Protocol
Name
Start Source IP Address
End Source IP Address
Start Destination IP Address
End Destination IP Address
Start Source Port
End Source Port
Start Destination Port
End Destination Port
Ingress
Egress
Mode Discard Permit
SJ-20110718111034-001|2011-07-18 (R1.0)
lists the parameters for IP filter configuration.
Chapter 5 Security Configuration
Description
To enable the IP filter function
Protocol
Name
Starting source IP address
Ending source IP address
Starting destination IP address
Ending destination IP address
Starting source port number
Ending source port number
Starting destination port number
Ending destination port number
Ingress interface
Egress interface
Mode, including discard and permit
5-3
ZTE Proprietary and Confidential