Zte ZXA10 F660 User Manual page 32

ZXA10 F660 User Manual
2. The connection type can be PPPoE, Static, or DHCP.
a. Configure the
Select PPPoE for Type, as shown in
Figure 4-2 PPPoE Mode Configuration
Table 4-1
Table 4-1 Parameters for PPPoE Mode Configuration
SJ-20110718111034-001|2011-07-18 (R1.0)
PPPoE mode.
lists the parameters for the
Parameter
Type
Connection Name
Enable NAT
Service List
VLAN ID
Username
Password
Authentication Type
Figure 4-2.
PPPoE mode configuration.
Description
Connection mode
PPPoE connection name, automatically generated
by the system
Whether to enable the
Service modes supported by the system:
l
TR069 service mode
Remote maintenance and management mode
l Internet service mode
Broadband and
l
VoIP service mode
Voice service mode
VLAN ID
User name, used by the device authentication on
interworking
Password, used by the device authentication on
interworking
Authentication type, the same as the authentication
type for the uppper-layer device
4-2
ZTE Proprietary and Confidential
NAT function
IPTV service mode