Logging In To The Device - Zte ZXA10 F660 User Manual

ZXA10 F660 User Manual
l The Ethernet cable between the device and your PC has been connected properly.
l
The driver of your network adapter has been installed properly.
l
The TCP/IP setting has been configured correctly on your PC.
If the ZXA10 F660 IP address is 192.168.1.1, the IP address of the computer must
be from 192.168.1.2 to 192.168.1.254. The subnet mask must be 255.255.255.0
and the default gateway must be 192.168.1.1.

2.3 Logging In to the Device

Short Description
Perform this procedure to log in to the device.
Prerequisites
The device is properly connected and the computer is correctly configured.
Context
To log in to the device, perform the following steps:
Steps
1. Open the Internet Explorer. Enter http://192.168.1.1 (default
device) on the address bar and press Enter. The login dialog box is displayed, as
shown in
Figure 2-6 Login
2. Enter the Username and Password (by default, both are admin ). Click Login.
– End of Steps –
Result
Logging in to the device is successful.
SJ-20110718111034-001|2011-07-18 (R1.0)
Figure 2-6.
2-6
ZTE Proprietary and Confidential
IP address of the