Zte ZXA10 F660 User Manual page 58

ZXA10 F660 User Manual
Figure 5-8 DMZ Host
2. Configure the DMZ host parameters, as shown in
Figure 5-9 DMZ Host Configuration
Table 5-4
Table 5-4 Parameters for DMZ Host Configuration
Parameter
Enable
WAN Connection
DMZ Host IP Address
After the DMZ full port mapping function is enabled, all the ports are enabled by default.
The LAN-side host provides services through DNAT.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
SJ-20110718111034-001|2011-07-18 (R1.0)
lists the parameters for DMZ host configuration.
Note:
Description
To enable the DMZ host
WAN-side connection interface
IP address of the DMZ host
5-8
Figure 5-9.
ZTE Proprietary and Confidential