Context
To configure the
Steps
1. On the Application tab, select QoS, and then select Rule Type, as shown in
6-21.
Figure 6-21 Rule Type
2. Configure the QoS rule type parameters, as shown in .
Table 6-9
Table 6-9 Parameters for QoS Rule Type Configuration
Parameter
Classification Rules
Protocol
Type
Minimum
Maximum
3. Click Add to finish the configuration, as shown in
SJ-20110718111034-001|2011-07-18 (R1.0)
QoS
rule type, perform the following steps:
lists the parameters for QoS rule type Configuration
Description
Classification rules
Protocol
Range: TCP, UDP, ICMP, and
Type
Minimum value
Maximum value
Chapter 6 Service Configuration
Figure
6-21
ZTE Proprietary and Confidential
Figure
RTP
6-22.