ZXA10 F660 User Manual
Prerequisites
The user has logged in to the Web interface of the device.
Context
The UPnP function supports zero configuration and device auto-discovery. After this
function is configured, the device can be dynamically added to a network to obtain the IP
address, announce the function, and know the functions of other devices.
To configure UPnP, perform the following steps:
Steps
1. On the Application tab, select UPnP, as shown in
Figure 6-11 UPnP
2. Configure the UPnP parameters, as shown in
Figure 6-12 UPnP Configuration
SJ-20110718111034-001|2011-07-18 (R1.0)
Figure
Figure
6-12
ZTE Proprietary and Confidential
6-11.
6-12.