Zte ZXA10 F660 User Manual page 44

ZXA10 F660 User Manual
Figure 4-12 DHCP Server
2. On the DHCP Server tab, configure the parameters, as listed in
Table 4-9 Parameters for DHCP Server Configuration
Parameter
LAN IP Address
Subnet Mask
Enable DHCP Server
DHCP Start IP Address
DHCP End IP Address
DNS Server1 IP Address
DNS Server2 IP Address
DNS Server3 IP Address
Default Gateway
Lease Time
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
The DHCP server is configured.
SJ-20110718111034-001|2011-07-18 (R1.0)
Description
IP address of the LAN
Subnet mask of the LAN group
To enable or disable the
Starting IP address allocated by the DHCP server
Ending IP address allocated by the DHCP server
IP address of the DNS
IP address of the DNS server
IP address of the DNS server
IP address of the default gateway
Lease time of the IP address by the DHCP server
4-14
ZTE Proprietary and Confidential
Table 4-9.
group (interface subnet)
DHCP server
server