Zte ZXA10 F660 User Manual page 86

ZXA10 F660 User Manual
Steps
1. On the Application tab, select QoS, and then select Queue Management, as shown
in Figure
Figure 6-24 Queue Management
2. Click the Modify icons in the table to modify the queue management functions.
3. Select or clear Enable to enable or disable the queue management function.
4. Click Modify to finish the configuration.
1 indicates enabled and 0 indicates disabled.
When the congestion management algorithm is DWRR, the queue weight needs to be
configured.
Weight refers to the ratio of the data flow passing through the queues to the total data
flow.
– End of Steps –
Result
QoS queue management is configured.
SJ-20110718111034-001|2011-07-18 (R1.0)
6-24.
Note:
6-24
ZTE Proprietary and Confidential