Zte ZXA10 F660 User Manual page 71

Context
To configure fax, perform the following steps:
Steps
1. On the Application tab, select VoIP, and then select Fax, as shown in
Figure 6-8 Fax Configuration
2. Select Enable T38.
Note:
To disable T38 fax mode, clear the check box.
3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
– End of Steps –
Result
Fax is configured.
SJ-20110718111034-001|2011-07-18 (R1.0)
Chapter 6 Service Configuration
6-9
ZTE Proprietary and Confidential
Figure 6-8.