Zte ZXA10 F660 User Manual
  1. Manuals
  2. Brands
  3. Zte Manuals
  4. Touch terminals
  5. ZXA10 F660
  6. User manual

Zte ZXA10 F660 User Manual

Gpon ont optical network terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

ZXA10 F660
GPON ONT
User Manual
Version: V1.0
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZXA10 F660 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Zte ZXA10 F660

Summary of Contents for Zte ZXA10 F660

  • Page 1 ZXA10 F660 GPON ONT User Manual Version: V1.0 ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://ensupport.zte.com.cn E-mail: support@zte.com.cn...
  • Page 2 Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement.

  • Page 3: Table Of Contents

    Contents Preface......................I Chapter 1 Overview ..................1-1 1.1 Product Introduction ................... 1-1 1.2 Packing List ....................... 1-2 1.3 Features and Specifications ................1-2 1.4 Product Appearance................... 1-3 1.5 System Requirements ..................1-6 1.6 System Application Environment ................. 1-6 Chapter 2 Configuration Preparation ............2-1 2.1 Preliminary Setup....................
  • Page 4 Chapter 5 Security Configuration ............. 5-1 5.1 Configuring Firewall.................... 5-1 5.2 Configuring IP Filter.................... 5-2 5.3 Configuring URL Filter ..................5-5 5.4 Configuring DMZ Host ..................5-7 5.5 Configuring Port Forwarding ................5-9 Chapter 6 Service Configuration............... 6-1 6.1 SIP VoIP Service Configuration ................6-1 6.1.1 Configuring VoIP WAN Connection............
  • Page 5 7.2 User Management....................7-4 7.3 Device Management................... 7-5 7.3.1 System Management................7-5 7.3.2 Software Upgrade ..................7-6 7.3.3 Configuration Management ............... 7-8 7.4 Log Management ....................7-9 7.5 Ping Diagnosis ....................7-10 Chapter 8 FAQ..................... 8-1 8.1 FAQ ........................8-1 Glossary ......................

  • Page 7: Preface

    Preface Purpose This manual provides procedures and guidelines that support the operation on the ZXA10 F660 Optical Network Terminal (ZXA10 F660 for short). Intended Audience This manual is intended for engineers and technicians who perform operation activities on ZXA10 F660.
  • Page 8 Chapter 8, FAQ Provides the FAQs and solutions. Related Documentation None Conventions ZTE documents employ the following typographical conventions. Typographical Conventions Typeface Meaning Italics References to other Manuals and documents. “Quotes” Links on screens.
  • Page 9 Declaration of RoHS Compliance To minimize the environmental impact and take more responsibility to the earth we live, this document shall serve as formal declaration that ZXA10 F660 manufactured by ZTE CORPORATION is in compliance with the Directive 2002/95/EC of the European...
  • Page 10 PolyBrominated Diphenyl Ethers (PBDE's) This declaration is issued based on our current level of knowledge. Since conditions of use are outside our control, ZTE CORPORATION makes no warranties, express or implied, and assumes no liability in connection with the use of this information.

  • Page 11: Product Introduction

    It provides users with various services. Table 1-1 lists the ports and functions of ZXA10 F660 series products. Table 1-1 ZXA10 F660 Ports and Functions Product...

  • Page 12: Packing List

    Technical Features ZXA10 F660 implements data access and IP voice access. For data access, ZXA10 F660 implement L2 data switching and forwarding. By working with relevant network devices through signaling protocols such as H.248 and SIP, ZXA10 F660 implements IP voice function.

  • Page 13: Product Appearance

    Note: Changes or modifications made to this equipment not expressly approved by (ZTE Corporation) may void the FCC authorization to operate this equipment. Product Specifications ZXA10 F660 specifications are as follows: Rated current: 1.3 A Rated voltage: 12 V Operating temperature: -5℃...
  • Page 14 ZXA10 F660 User Manual Table 1-2 Front Panel LEDs Status Description Green, ON ONT GPON is registered and the link is activated. The ONT is not discovered and registered. Flashing The ONT is trying to be registered or set up the connection.
  • Page 15 The side panel has an SC/APC single-mode fiber interface, implementing the services provided by the access mode. It connects to the GPON interface of ZXA10 F660 through an SC/APC single-mode fiber. Figure 1-3 shows the side panel. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 16: System Requirements

    A computer in the LAN is installed with a Web browser, such as Microsoft Internet Explorer 6.0 or higher, Netscape Communicator 4.0 or higher. 1.6 System Application Environment ZXA10 F660 is an indoor device of ZTE series optical network terminal equipment. It works with the device to implement the FTTH application.
  • Page 17 Chapter 1 Overview Figure 1-4 System Application Environment As an indoor device, ZXA10 F660 can be put on the desk with the base or hung on the wall without the base. Figure 1-5 shows the ZXA10 F660 on a wall.
  • Page 18 ZXA10 F660 User Manual This page intentionally left blank. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 19: Chapter 2 Configuration Preparation

    Consult the ISP if some data from the ISP is needed. 2.2 Configuring TCP/IP Short Description Perform this procedure to configure TCP/IP of a computer connected to the ZXA10 F660. Context This instance takes Windows XP as an example. The default network settings for the ZXA10 F660 are as follows: address: 192.168.1.1...
  • Page 20 ZXA10 F660 User Manual 2. Double-click Local Area Connection to open the Local Area Connection Status dialog box, as shown in Figure 2-1. Figure 2-1 Local Area Connection Status 3. Click Properties in the General tab to open the Local Area Connection Properties dialog box.
  • Page 21 Select Use the following IP address and specify the IP address, Subnet mask, and Default gateway. For example, you can set the IP address to 192.168.1.7, Subnet mask to 255.255.255.0, and Default gateway to 192.168.1.1, as shown in Figure 2-3. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 22 ZXA10 F660 User Manual Figure 2-3 Specifying the IP address in the Internet Protocol (TCP/IP) Properties Note: The IP address shall be in the same network segment as LAN port address of the device, which means the IP address you type in should be “192.168.1.x” (x can be any value from 2 to 254).
  • Page 23 If the command window displays the messages, as shown in Figure 2-5, it indicates that the communication between your PC and the device fails. Figure 2-5 Failed Ping Message If the communication between your PC and the device fails, ensure the following items: SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 24: Logging In To The Device

    The driver of your network adapter has been installed properly. The TCP/IP setting has been configured correctly on your PC. If the ZXA10 F660 IP address is 192.168.1.1, the IP address of the computer must be from 192.168.1.2 to 192.168.1.254. The subnet mask must be 255.255.255.0 and the default gateway must be 192.168.1.1.

  • Page 25: Chapter 3 Device Status

    Table 3-1 Device Information Parameters Parameter Description Model Device type Serial Number Device serial number Hardware Version Hardware version number Software Version Software version number Boot Loader Version Boot version number PON Serial Number serial number SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 26: Network Connection Information

    WAN connection type VLAN ID VLAN ID used by the WAN interface to send and receive data Whether to enable the function IP address used by ZXA10 F660 used by ZXA10 F660 Default Gateway Gateway used by ZXA10 F660 Connection Status WAN connection status SJ-20110718111034-001|2011-07-18 (R1.0)

  • Page 27: User Interface Information

    Figure 3-3. Click Refresh to view the latest information. Figure 3-3 WLAN Interface Information Table 3-3 lists the parameters for the WLAN interface information. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 28: Ethernet Interface Information

    ZXA10 F660 User Manual Table 3-3 Parameters for the WLAN Interface Information Parameter Description Enable Wireless RF Whether to enable the wireless Channel Channel SSID1 Enable Whether to enable the wireless network SSID1 SSID1 Name SSID1 name, which identifies the wireless network...

  • Page 29: Voip Status Information

    3.3.3 VoIP Status Information On the Status tab, select User Interface. Select VoIP Status. The right pane displays the VoIP status information, as shown in Figure 3-5. Click Refresh to view the latest information. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 30 ZXA10 F660 User Manual Figure 3-5 VoIP Status Information Table 3-5 lists the parameters for the VoIP status information. Table 3-5 Parameters for the VoIP Status Information Parameter Description SIP Account Username Telephone number SIP Register Status Registration status of the voice service SJ-20110718111034-001|2011-07-18 (R1.0)
  • Page 31 To configure the connection, perform the following steps: Steps 1. On the Web interface of the device, click the Network tab. By default, WAN Connection is selected, as shown in Figure 4-1. Figure 4-1 WAN Connection SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 32 ZXA10 F660 User Manual 2. The connection type can be PPPoE, Static, or DHCP. a. Configure the PPPoE mode. Select PPPoE for Type, as shown in Figure 4-2. Figure 4-2 PPPoE Mode Configuration Table 4-1 lists the parameters for the PPPoE mode configuration.

  • Page 33: Chapter 4 Network Configuration

    Whether to enable the NAT function Service List Service modes supported by the system: TR069 service mode Remote maintenance and management mode Internet service mode Broadband and IPTV service mode VoIP service mode Voice service mode SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 34 Subnet mask used by ZXA10 F660 Default Gateway Gateway used by ZXA10 F660 DNS Server1 IP Address IP address of DNS1 used by ZXA10 F660 DNS Server2 IP Address IP address of DNS2 used by ZXA10 F660 DNS Server3 IP Address IP address of DNS3 used by ZXA10 F660 c.

  • Page 35: Wlan Configuration

    To configure the basic WLAN parameters, perform the following steps: Steps 1. On the Network tab, select WLAN on the left pane. By default, the Basic sub-node is selected, as shown in Figure 4-5. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 36 ZXA10 F660 User Manual Figure 4-5 Basic WLAN Configuration 2. Configure the basic WLAN parameters, as listed in Table 4-4. Table 4-4 Basic WLAN Parameters Parameter Description Enable Wireless RF Whether to enable wireless Mode Wireless communication mode Country/Region Country or region name...

  • Page 37: Configuring Multi-Ssid Parameters

    2. Configure the multi-SSID parameters as shown in Table 4-5. Table 4-5 Multi-SSID Parameters Parameter Description Choose SSID Choose the SSID that needs to be configured. Hide SSID Disable or enable SSID broadcast. Enable SSID Enable the SSID. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 38: Configuring Security Properties

    ZXA10 F660 User Manual Parameter Description SSID Name SSID name. It cannot exceed 32 characters and is case sensitive. It is used to control the WLAN access. The SSID name must match all the SSIDs of the related access nodes; otherwise, the device cannot be accessed.
  • Page 39 128–bit encryption. WEP Key Index Current encryption value WEP Key1 WEP encryption value Range: 5–bit ASCII code or 10–bit hexadecimal number WEP Key2 WEP encryption value Range: 5–bit ASCII code or 10–bit hexadecimal number SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 40 ZXA10 F660 User Manual Parameter Description WEP Key3 WEP encryption value Range: 5–bit ASCII code or 10–bit hexadecimal number WEP Key4 WEP encryption value Range: 5–bit ASCII code or 10–bit hexadecimal number b. In Authentication Type, select Shared Key. By default, WEP Encryption is enabled.
  • Page 41 Authentication Type Current SSID authentication mode WPA Passphrase pre-shared key Range: 8 – 63 characters WPA Group Key Update Interval Update interval of the WPA group key WPA Encryption Algorithm WPA encryption algorithm 4-11 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 42: Viewing Associated Devices

    ZXA10 F660 User Manual Note: The configuration method for the WPA2-PSK authentication mode is the same as that for the WPA-PSK authentication mode. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps –...

  • Page 43: Address Management Configuration

    The user has logged in to the Web interface of the device. Context To configure the DHCP server, perform the following steps: Steps 1. On the Network tab, select Address Management. By default, DHCP Server is selected, as shown in Figure 4-12. 4-13 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 44 ZXA10 F660 User Manual Figure 4-12 DHCP Server 2. On the DHCP Server tab, configure the parameters, as listed in Table 4-9. Table 4-9 Parameters for DHCP Server Configuration Parameter Description LAN IP Address IP address of the group (interface subnet)

  • Page 45: Configuring Dhcp Binding

    192.168.1.113, it indicates that the DHCP server allocates the IP address 192.168.1.113 to the host which the MAC address corresponds to. Note: The IP address belongs to the address pool that is provided by the DHCP server in the LAN group. 4-15 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 46: Configuring Specific Address Range

    ZXA10 F660 User Manual 3. Click Add to finish the configuration. Click Modify to modify the configuration. Click Delete to delete the configuration. – End of Steps – Result DHCP binding is configured. 4.3.3 Configuring Specific Address Range Short Description Perform this procedure to configure the specific address range.

  • Page 47: Route Management Configuration

    The user has logged in to the Web interface of the device. Context To configure the default gateway, perform the following steps: Steps 1. On the Network tab, select Routing Management. By default, Default Gateway is selected, as shown in Figure 4-16. 4-17 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 48: Configuring Static Routing

    ZXA10 F660 User Manual Figure 4-16 Default Gateway 2. From WAN Connection, select the connection interface at the side. Note: This interface is available when configured on WAN Connection. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
  • Page 49 3. Configure Network Address, Subnet Mask, and Default Gateway, as shown in Figure 4-18. Figure 4-18 Static Routing Configuration 4. Click Add to finish the configuration, as shown in Figure 4-19. Click Modify to modify the configuration. Click Delete to delete the configuration. 4-19 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 50 ZXA10 F660 User Manual Figure 4-19 Static Routing Configuration Completed – End of Steps – Result The static routing is configured. 4-20 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 51: Chapter 5 Security Configuration

    Steps 1. On the Web interface, click the Security tab. By default, Firewall is selected, as shown in Figure 5-1. Figure 5-1 Firewall Configuration 2. Set the firewall parameters, as listed in Table 5-1. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 52: Configuring Ip Filter

    ZXA10 F660 User Manual Table 5-1 Firewall Parameters Parameter Description Enable Anti-Hacking Protection To enable or disable anti-hacking protection Firewall Level Firewall level High: Allow legal WAN-side access but prohibit WAN-side ping. Low: Allow legal WAN-side access and WAN-side ping.
  • Page 53 End Source Port Ending source port number Start Destination Port Starting destination port number End Destination Port Ending destination port number Ingress Ingress interface Egress Egress interface Mode Discard Permit Mode, including discard and permit SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 54 ZXA10 F660 User Manual 2. On the IP Filter tab, set the filter parameters, as shown in Figure 5-3. Figure 5-3 IP Filter Configuration 3. Click Add to finish the configuration, as shown in Figure 5-4. Click Modify to modify the configuration.

  • Page 55: Configuring Url Filter

    The user has logged in to the Web interface of the device. Context To configure the filter, perform the following steps: Steps 1. On the Security tab, select URL Filter, as shown in Figure 5-5. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 56 ZXA10 F660 User Manual Figure 5-5 URL Filter Table 5-3 lists the parameters for URL filter configuration. Table 5-3 Parameters for URL Filter Configuration Parameter Description Enable To enable the URL filter function Mode Mode, including discard and permit URL Address URL address 2.

  • Page 57: Configuring Dmz Host

    The user has logged in to the Web interface of the device. Context To configure the host, perform the following steps: Steps 1. On the Security tab, select DMZ Host, as shown in Figure 5-8. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 58 ZXA10 F660 User Manual Figure 5-8 DMZ Host 2. Configure the DMZ host parameters, as shown in Figure 5-9. Figure 5-9 DMZ Host Configuration Table 5-4 lists the parameters for DMZ host configuration. Table 5-4 Parameters for DMZ Host Configuration...

  • Page 59: Configuring Port Forwarding

    To configure port forwarding, perform the following steps: Steps 1. On the Security tab, select Port Forwarding, as shown in Figure 5-10. Figure 5-10 Port Forwarding 2. Configure the port forwarding parameters, as shown in Figure 5-11. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 60 ZXA10 F660 User Manual Figure 5-11 Port Forwarding Configuration Table 5-5 lists the parameters for port forwarding configuration. Table 5-5 Parameters for Port Forwarding Configuration Parameter Description Enable To enable the port forwarding function Name Host name Protocol Protocol name, including TCP, UDP, as well as TCP...
  • Page 61 3. Click Add to finish the configuration, as shown in Figure 5-12. Click Modify to modify the configuration. Click Delete to delete the configuration. Figure 5-12 Port Forwarding Configuration Completed – End of Steps – Result Port forwarding is configured. 5-11 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 62 ZXA10 F660 User Manual This page intentionally left blank. 5-12 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 63: Chapter 6 Service Configuration

    Context To configure the VoIP WAN connection, perform the following steps: Steps 1. On the Web interface, click the Application tab. Select VoIP. By default, WAN Connection is selected, as shown in Figure 6-1. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 64: Configuring Sip

    ZXA10 F660 User Manual Figure 6-1 WAN Connection 2. Select a connection interface from WAN Connection. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps – Result The VoIP WAN connection is configured.
  • Page 65 Port number of the secondary proxy server Register Expires Registration expiration time Unit: second 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps – Result SIP is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 66: Configuring Sip Accounts

    ZXA10 F660 User Manual 6.1.3 Configuring SIP Accounts Short Description Perform this procedure to configure SIP accounts. Prerequisites The user has logged in to the Web interface of the device. Context To configure accounts, perform the following steps: Steps 1. On the Application tab, select VoIP, and then select SIP Accounts, as shown in Figure 6-3.

  • Page 67: Configuring Voip Advanced Parameters

    The SIP accounts are configured. 6.1.4 Configuring VoIP Advanced Parameters Short Description Perform this procedure to configure the VoIP advanced parameters. Prerequisites The user has logged in to the Web interface of the device. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 68 ZXA10 F660 User Manual Context To configure the VoIP advanced parameters, perform the following steps: Steps 1. On the Application tab, select VoIP, and then select Advanced, as shown in Figure 6-5. Figure 6-5 Advanced Parameters 2. Configure the advanced parameters, as shown in Table 6-3.

  • Page 69: Configuring Voip Media Parameters

    Steps 1. On the Application tab, select VoIP, and then select Media, as shown in Figure 6-6. Figure 6-6 Media Parameters 2. Configure the media parameters, as shown in Figure 6-7. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 70: Configuring Fax

    ZXA10 F660 User Manual Figure 6-7 Media Parameter Configuration Table 6-4 lists the media parameters. Table 6-4 Media Parameters Parameter Description Codec Selection Code type Codec Priority Code priority The smaller the value is, the higher the priority is. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.
  • Page 71 2. Select Enable T38. Note: To disable T38 fax mode, clear the check box. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps – Result Fax is configured. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 72: Configuring Ddns

    ZXA10 F660 User Manual 6.2 Configuring DDNS Short Description Perform this procedure to configure DDNS. Prerequisites The user has logged in to the Web interface of the device. Context After DDNS is applied, the host that has the dynamic address can also provide the domain name service.

  • Page 73: Configuring Upnp

    3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps – Result DDNS is configured. 6.3 Configuring UPnP Short Description Perform this procedure to configure UPnP. 6-11 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 74 ZXA10 F660 User Manual Prerequisites The user has logged in to the Web interface of the device. Context The UPnP function supports zero configuration and device auto-discovery. After this function is configured, the device can be dynamically added to a network to obtain the IP address, announce the function, and know the functions of other devices.

  • Page 75: Dns Configuration

    The user has logged in to the Web interface of the device. Context To configure the domain name, perform the following steps: Steps 1. On the Application tab, select DNS Service. By default, Domain Name is selected, as shown in Figure 6-13. 6-13 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 76: Configuring Host Name

    ZXA10 F660 User Manual Figure 6-13 Domain Name 2. Set Domain Name. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps – Result The domain name is configured. 6.4.2 Configuring Host Name Short Description Perform this procedure to configure the host name.
  • Page 77 2. Set Host Name and IP Address, as shown in Figure 6-15. Figure 6-15 Host Name Configuration 3. Click Add to finish the configuration, as shown in Figure 6-16. Click Modify to modify the configuration. Click Delete to delete the configuration. 6-15 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 78: Qos Configuration

    ZXA10 F660 User Manual Figure 6-16 Host Name Configuration Completed – End of Steps – Result The host name is configured. 6.5 QoS Configuration This topic includes the following: Configuring Basic QoS Parameters Configuring QoS Rule Configuring QoS Rule Type...
  • Page 79 1. On the Application tab, select QoS. By default, Basic is selected, as shown in Figure 6-17. Figure 6-17 Basic QoS Parameters Note: The template index is enabled immediately after changed. 2. Configure the basic QoS parameters, as shown in Figure 6-18. 6-17 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 80 ZXA10 F660 User Manual Figure 6-18 Basic QoS Parameter Configuration Table 6-7 lists the basic QoS parameters. Table 6-7 Basic QoS Parameters Parameter Description Template Index Template index Enable QoS To enable or disable the QoS function The Total Upstream Bandwidth...

  • Page 81: Configuring Qos Rule

    Steps 1. On the Application tab, select QoS, and then select Rule, as shown in Figure 6-19. Figure 6-19 QoS Rule 2. Configure the QoS rule parameters, as shown in Figure 6-20. 6-19 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 82: Configuring Qos Rule Type

    ZXA10 F660 User Manual Figure 6-20 QoS Rule Configuration Table 6-8 lists the parameters for QoS rule configuration. Table 6-8 Parameters for QoS Rule Configuration Parameter Description 802.1p Re-marking 802.1P remarking DSCP Re-marking DSCP remarking CAR(Committed Access Rate) Ingress rate limit rule...
  • Page 83 Parameter Description Classification Rules Classification rules Protocol Protocol Range: TCP, UDP, ICMP, and Type Type Minimum Minimum value Maximum Maximum value 3. Click Add to finish the configuration, as shown in Figure 6-22. 6-21 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 84: Configuring Qos Local Application

    ZXA10 F660 User Manual Figure 6-22 Rule Type Configuration Completed 4. Click Modify to modify the configuration. Click Delete to delete the configuration. – End of Steps – Result The QoS rule type is configured. 6.5.4 Configuring QoS Local Application Short Description Perform this procedure to configure the QoS local application.

  • Page 85: Configuring Qos Queue Management

    6.5.5 Configuring QoS Queue Management Short Description Perform this procedure to configure QoS queue management. Prerequisites The user has logged in to the Web interface of the device. Context To configure queue management, perform the following steps: 6-23 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 86 ZXA10 F660 User Manual Steps 1. On the Application tab, select QoS, and then select Queue Management, as shown Figure 6-24. Figure 6-24 Queue Management 2. Click the Modify icons in the table to modify the queue management functions. 3. Select or clear Enable to enable or disable the queue management function.

  • Page 87: Configuring Qos Ingress Rate Limit

    1. On the Application tab, select QoS, and then select Ingress Rate Limit, as shown Figure 6-25. Figure 6-25 Ingress Rate Limit 2. Configure the parameters for QoS ingress rate limit, as shown in Figure 6-26. 6-25 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 88: Configuring Sntp Client

    ZXA10 F660 User Manual Figure 6-26 Ingress Rate Limit Configuration Table 6-10 lists the parameters for ingress rate limit configuration. Table 6-10 Parameters for Ingress Rate Limit Configuration Parameter Description Visiting Interface User interface for the rate limit rule Enable...
  • Page 89 Figure 6-28 SNTP Configuration Table 6-11 lists the SNTP parameters. Table 6-11 SNTP Parameters Parameter Description Time Zone Time zone where the subscriber is located Primary NTP Server IP address of the primary server Address 6-27 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 90: Igmp Configuration

    ZXA10 F660 User Manual Parameter Description Secondary NTP Server IP address of the secondary NTP server Address Poll Interval Interval for server synchronization Unit: second 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps –...
  • Page 91 Figure 6-30 IGMP Snooping Configuration Table 6-12 lists the parameters for IGMP snooping configuration. Table 6-12 Parameters for IGMP Snooping Configuration Parameter Description IGMP Mode IGMP mode Multicast MAC Aging Time Aging time of the multicast address 6-29 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 92 Report Time Periodical report time of multicast messages Note: ZXA10 F660 periodically reports the IGMP member report messages to the upper-layer multicast router according to the Report Time. 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration.

  • Page 93: Configuring Multicast Vlan

    Steps 1. On the Application tab, select IGMP, and then select Multicast VLAN, as shown in Figure 6-32. Figure 6-32 Multicast VLAN 2. Configure the multicast VLAN parameters, as shown in Figure 6-33. 6-31 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 94: Configuring Multicast Mac Limit

    ZXA10 F660 User Manual Figure 6-33 Multicast VLAN Configuration Table 6-14 lists the parameters for the multicast VLAN configuration. Table 6-14 Parameters for Multicast VLAN Configuration Parameter Description IGMP Mode IGMP mode, configured on the Basic tab Enable Multicast VLAN...
  • Page 95 2. Click the Modify icon to configure the multicast MAC limit, as shown in Figure 6-35. Figure 6-35 Multicast MAC Limit Configuration Table 6-15 lists the parameters for the multicast MAC limit configuration. 6-33 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 96: Configuring Mvlan Tag Strip

    ZXA10 F660 User Manual Table 6-15 Parameters for Multicast MAC Limit Configuration Parameter Description Multicast MAC Address Limit Maximum multicast addresses for each LAN port Range: 0 – 256 3. Click Modify. – End of Steps – Result Multicast MAC limit is configured.
  • Page 97 Table 6-16 Parameters for MVLAN Tag Strip Configuration Parameter Description Enable Tag Stripe To enable the MVLAN tag strip function 3. Click Modify. – End of Steps – Result MVLAN tag strip is configured. 6-35 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 98: Configuring Ftp Application

    ZXA10 F660 User Manual 6.8 Configuring FTP Application Short Description Perform this procedure to configure FTP application. Prerequisites The user has logged in to the Web interface of the device. Context To configure application, perform the following steps: Steps 1. On the Application tab, select FTP Application, as shown in Figure 6-38.
  • Page 99 FTP Username FTP login user name FTP Password FTP login password 3. Click Submit to finish the configuration. Click Cancel to cancel the configuration. – End of Steps – Result FTP application is configured. 6-37 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 100 ZXA10 F660 User Manual This page intentionally left blank. 6-38 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 101 The user has logged in to the Web interface of the device. Context To configure the basic TR069 parameters, perform the following steps: Steps 1. On the Administration tab, select TR-069. By default, Basic is selected, as shown Figure 7-1. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 102 ZXA10 F660 User Manual Figure 7-1 Basic TR069 Parameters 2. Configure the basic TR069 parameters, as shown in Figure 7-2. Figure 7-2 Basic TR069 Parameter Configuration Table 7-1 lists the basic TR069 parameters. Table 7-1 Basic TR069 Parameters Parameter Description...

  • Page 103: Chapter 7 Device Management

    To import the TR069 certificate, perform the following steps: Steps 1. On the Administration tab, select TR-069, and then select Certificate, as shown in Figure 7-3. Figure 7-3 TRO69 Certificate 2. Click Browse to select the certificate file. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 104: User Management

    ZXA10 F660 User Manual 3. Click Import Certificate to import the file. – End of Steps – Result The TR069 certificate is imported. 7.2 User Management Short Description Perform this procedure to manage users. Prerequisites The user has logged in to the Web interface of the device.

  • Page 105: Device Management

    Context To manage the system, perform the following steps: Steps 1. On the Administration tab, select System Management, as shown in Figure 7-5. Figure 7-5 System Management 2. Click Reboot to reboot the device. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 106: Software Upgrade

    Caution! Generally, the software is upgraded by the ZTE CORPORATION engineers. If the user wants to upgrade the software, contact the local office of ZTE CORPORATION to obtain the latest software version. To upgrade the software, perform the following steps: Steps 1.
  • Page 107 During the upgrade process, the device cannot be powered off; otherwise, it may be damaged. During the upgrade process, the system prompts a message. After the upgrade is complete, the system returns to the login interface. – End of Steps – Result The software is upgraded. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 108: Configuration Management

    ZXA10 F660 User Manual 7.3.3 Configuration Management Short Description Perform this procedure to manage the device configuration. Prerequisites The user has logged in to the Web interface of the device. Context To manage the device configuration, perform the following steps: Steps 1.

  • Page 109: Log Management

    The user has logged in to the Web interface of the device. Context To manage logs, perform the following steps: Steps 1. On the Administration tab, select Log Management, as shown in Figure 7-11. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 110: Ping Diagnosis

    ZXA10 F660 User Manual Figure 7-11 Log Management 2. Configure the log management parameters, as listed in Table 7-2. Table 7-2 Log Management Parameters Parameter Description Log Enable Whether to enable the log server Log Level Log level, including Debug, Informational, Notice, Warning,...
  • Page 111 3. Click Submit to diagnose the connection, as shown in Figure 7-13. Click Cancel to cancel the configuration. Figure 7-13 Ping Diagnosis Result – End of Steps – Result Ping diagnosis is complete. 7-11 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 112 ZXA10 F660 User Manual This page intentionally left blank. 7-12 SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 113: Chapter 8 Faq

    Then access the Web interface of the device. Click the Application tab to check the VoIP configuration. If the VoIP configuration is correct and the telephone cable is correctly connected, but the call still cannot be made, contact the service provider. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...
  • Page 114 ZXA10 F660 User Manual This page intentionally left blank. SJ-20110718111034-001|2011-07-18 (R1.0) ZTE Proprietary and Confidential...

  • Page 115: Glossary

    Glossary CATV - CAble TeleVision - Comfort Noise Generation - Direct Current DDNS - Dynamic Domain Name Server DHCP - Dynamic Host Configuration Protocol - Demilitarized Zone DNAT - Destination Network Address Translation - Domain Name Server DSCP - Differentiated Services Code Point - Digital Subscriber Line DTMF - Dual-ToneMulti-Frequency...
  • Page 116 ZXA10 F660 User Manual ICMP - Internet Control Message Protocol IEEE - Institute of Electrical and Electronics Engineers IGMP - Internet Group Management Protocol - Internet Protocol IPTV - Internet Protocol Television - Internet Service Provider - International Telecommunications Union...
  • Page 117 Glossary - Radio Frequency - Real-time Transport Protocol - Session Initiation Protocol SNTP - Simple Network Time Protocol - Strict Priority - Soft Switch - Transfer Control Protocol TCP/IP - Transfer Control Protocol/Internet Protocol - User Datagram Protocol - UniformResource Locator - Voice Activity Detectors VLAN - Virtual Local Area Network...

Table of Contents

Save PDF