Zte ZXA10 F660 User Manual page 40

ZXA10 F660 User Manual
b. In Authentication Type, select Shared Key. By default, WEP Encryption is
enabled. The Shared Key configuration information is displayed, as shown in
Figure
Figure 4-9 Shared Key Configuration
Table 4-7
Table 4-7 Parameters for Shared Key Authentication Mode
SJ-20110718111034-001|2011-07-18 (R1.0)
Parameter Description
WEP Key3 WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP Key4 WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
4-9.
lists the parameters for the Shared Key authentication mode.
Parameter Description
Choose SSID Current SSID
Authentication Type Current SSID authentication mode
WEP Encryption To enable or disable WEP encryption
WEP Encryption WEP encryption length
l
Level
l
Generally, the 64–bit encryption can meet the user requirements. To
enhance security, use the 128–bit encryption.
WEP Key Index Current encryption value
The 128–bit encryption can be a 13–bit ASCII codes or a 26–bit
hexadecimal number.
The 64–bit encryption can be a 5–bit ASCII code or a 10–bit
hexadecimal number.
4-10
ZTE Proprietary and Confidential