Zte ZXA10 F660 User Manual page 39

2. From the Choose SSID drop-down list, select an SSID.
a. In Authentication Type, select Open System, and then enable WEP Encryption
(by default, it is disabled).
displayed, as shown in
Figure 4-8 Open System Configuration
Table 4-6
Table 4-6 Parameters for Open System Authentication Mode
Parameter
Choose SSID
Authentication Type
WEP Encryption
WEP Encryption
Level
WEP Key Index
WEP Key1
WEP Key2
SJ-20110718111034-001|2011-07-18 (R1.0)
The Open System configuration information is
Figure 4-8.
lists the parameters for the Open System authentication mode.
Description
Current SSID
Current SSID authentication mode
To enable or disable
WEP encryption length
l
The 128–bit encryption can be a 13–bit ASCII codes or a 26–bit
hexadecimal number.
l
The 64–bit encryption can be a 5–bit ASCII code or a 10–bit
hexadecimal number.
Generally, the 64–bit encryption can meet the user requirements. To
enhance security, use the 128–bit encryption.
Current encryption value
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
WEP encryption value
Range: 5–bit ASCII code or 10–bit hexadecimal number
4-9
Chapter 4 Network Configuration
WEP encryption
ZTE Proprietary and Confidential