Table of Contents
Advertisement
Software problem
Suspected software problem
Advanced System
Management PCI Adapter
problems
The Advanced System
Management PCI adapter is
not working properly
Action
To determine if problems are caused by the software, verify that:
1. Your system has the minimum memory requirements needed
to use the software. Refer to the information supplied with
the software to verify memory requirements.
Note: If you have just installed an adapter or memory, you
might have a memory address conflict (see
"Resolving configuration conflicts" in the User's
Reference on the IBM xSeries Documentation CD).
2. The software is designed to operate on your system.
3. Other software works on your system.
4. The software you are using works on another system.
If you received any error messages when using the software
program, refer to the information supplied with the software for a
description of the messages and solutions to the problem.
If the items above are correct and the problem remains, contact
your place of purchase or service technician for help.
Action
Disconnect the server from all electrical sources, wait for 30
seconds, and reconnect the server to the electrical sources. If
the processor error LED (CR2 top) lights continuously, have your
system serviced. (See the Advanced System Management PCI
adapter layout in the User's Reference on the IBM xSeries
Documentation CD for the location of the processor error LED.)
Chapter 5. Solving problems
55
Advertisement
Table of Contents
