Table of Contents
Advertisement
5. Turn the four plastic fasteners 2 on the processor-cage cover 1 until they
are in the unlocked position (one quarter-turn). You may use a flat-blade
screwdriver or a coin.
6. Remove the processor-cage cover 1 and set it aside.
7. Determine the processor connector in which you want to install the new
processor. If the connector contains a processor terminator card 5 :
a. Pull the processor terminator card latches 4 so that they rotate to the
unlocked position.
b. Remove the processor terminator card 5 from the processor connector.
c. Store the processor terminator card in a safe place.
Note: After you install the new processor in your server, place the
terminator card in the empty static-protective package.
8. If you are installing processors in the optional processor-daughterboard
assembly, first follow the instructions in "Installing a processor daughterboard"
on page 32; then, return here to continue.
Chapter 2. Installing options
29
Advertisement
Table of Contents
