Table of Contents
Advertisement
Press and hold the release latches, and then remove the air baffle.
5.
To replace the component, reverse the removal procedure.
Front drive cage assembly
The drive cage assembly includes the drive cage with backplane and the front panel assembly.
To remove the component:
Power down the server (on page 31).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove all installed drives
3.
Remove the server from the rack (on page 34).
4.
If the server is installed in a friction rail system, remove the friction rails from the chassis. For more
5.
information, see the documentation that ships with the rail system.
Remove the access panel
6.
Disconnect the front panel assembly and the Discovery service cables from the system board
7.
panel
cabling" on page 99).
Disconnect all cables connected to the drive cage backplane.
8.
Remove the optical drive
9.
("Hot-plug
drive" on page 35).
("Access
panel" on page 37).
("Optical
drive" on page 38).
Removal and replacement procedures 43
("Front
Advertisement
Table of Contents
