Fan Board - HP ProLiant DL380e Gen8 Maintenance And Service Manual

Do one of the following:
3.
Extend the server from the rack (on page 32).
o
Remove the server from the rack (on page 34).
o
Remove the access panel
4.
Remove the air baffle
5.
Disconnect all cables connected to the fan board.
6.
Remove all fan blanks and modules
7.
Remove the fan cage.
8.
Remove the fan board
9.
To replace the component, reverse the removal procedure.

Fan board

To remove the component:
Power down the server (on page 31).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 32).
o
Remove the server from the rack (on page 34).
o
Remove the access panel
4.
Remove the air baffle
5.
Remove the fan cage
6.
("Access panel" on page 37).
("Air baffle" on page 42).
("Hot-plug fan blank and
("Fan board" on page 48).
("Access panel" on page 37).
("Air baffle" on page 42).
("Fan cage" on page 47).
module" on page 44).
Removal and replacement procedures 48